Zeiss Stemi 305 Operating Manual

Also see for Stemi 305: Operating manual

Zeiss Stemi 305 Operating Manual Manual pdf 23 page image

Stereo microscope INSTALLATION ZEISSStemi 305 General information09/2017 435063-7144-008 21English3 INSTALLATION3.1 General informationBefore installing and commissioning the device, make sure to read the Notes on instrumentsafety carefully (see section 1.2, Page 4).The Stemi 305 with the necessary tools and optional equipment is delivered in several standard packages.• Take all units out of the packaging and check them for completeness according to the delivery note.For installation and/or transport of the microscope or the stand, exclusively use the handle(Fig. 3/5) provided to this effect.• Remove transport securing devices (adhesive tapes etc.).• Keep original packaging for a possibly extended period of storage or return of the device to themanufacturer or dispose of it appropriately.3.2 Installing the stereo microscope• Place stand on a level, firm support.• If the Stemi 305 body (Fig. 10/2) has not yetbeen mounted, insert it in the Stemi mount(Fig. 10/4), align it and secure it using theclamping screw (Fig. 10/6).The appropriate Allen key (Fig. 10/9) is locatedin the support on the back of the device.• If the two eyepieces (Fig. 10/1) have not yetbeen mounted, insert them both to their stop inthe eyepiece tube.• Remove the two protective caps from theeyepieces (Fig. 9/1) and remove the protectivecap (Fig. 9/2) from the objective by turning.Fig. 9 Removing caps