Zeiss Stemi 305 cam Operating Manual

Also see for Stemi 305 cam: Operating manual Instruction manual

Contents

Zeiss Stemi 305 cam Operating Manual Manual pdf 25 page image

Stereo microscope CARE, MAINTENANCE AND SERVICE ZEISSStemi 305 cam Maintenance03/2015 435063-9044-008 23English5.2 Maintenance5.2.1 Wearing partsThe following wearing parts can be ordered directly from ZEISS:Description Order No. RemarkPlastic plate B/W, d = 84 mm 435425-9320-000Glass plate, d = 84 mm 435425-9310-000Eyecups 444801-0000-000 required 2xEyepiece 10x/23Set of small componentsconsisting of:- 2x spiral cables RJ-12- 1x cable RJ-12 , length 1m- 2x caps, eyepiece- 1x cap, microscope body- 1x Allen key, SW 3- 1x M6 clamping screw, microscope mount- 2x M6 clamping screws for C mount- 2x rubber rings, eyepiece- 1x Cover, C-mount Stemi 305 trino- 2x Dust cover for eyepiece tubes- 1x M4x8 screwProtective dust cover, stand K 415500-1800-0005.3 ServiceAll interventions in mechanical, optical and electronic internal microscope components may only beperformed by Carl Zeiss Service or by specifically authorized qualified staff.To ensure your microscope is optimally set and also operates correctly over an extended period of time,we recommend that you conclude a service/maintenance contract with ZEISS.For reordering or in case of service, contact your nearest regional ZEISS representative.5.4 Product disposalThe product was developed, tested and produced in accordance with the valid regulations and guidelinesfor environmental law of the European Union.The product and its accessories comply with the EU-regulations 2011/65/EC (RoHS) and 2012/19/EC(WEEE), and the German Electrical and Electronic Equipment Act (ElektroG).The product contains electronic components which must be disposed of according to the requirements ofthe 2002/19/EC WEEE Directive and not as domestic waste. In addition, the national regulations must becomplied with.For details on disposal and recycling please refer to your relevant ZEISS sales or service organization.