Zenith A25A76R Operating Manual

Also see for A25A76R: Service manual Operating guide

Contents

206-3450-OI N S TA L L AT I O N S TA N DA R D P A G E 5Connect cableto yourEntertainmentMachineHook Up Your Cable (CATV) to the TVCable TVwall jackCable TVwall jackAudio In VideoCable boxInOutRF coaxial wire (75ohm)RF coaxial wire (75ohm)3 4outputswitchTV back panel(expanded view)AntennaCableTV backAudio In VideoTV back panel(expanded view)AntennaCableTV backIf you’re using a cable box, leaveyour TV on channel 3 or 4 and useyour cable box to change chan-nels.Remember, when screwing RFcables onto jacks, clockwise tight-ens, and counterclockwise loosensIf you’re using a cable box, AutoProgram might only find the chan-nel your cable service is on (usual-ly channel 3 or 4). Don’t worry,that’s all you need!back ofremoteLocate the Antenna/Cable jack onthe back of your EntertainmentMachine.Connect the cable that runs fromthe wall directly to this jack.Remove the back of the remoteand put in two AAA batteries.Plug in your TV. Do not plug itinto a switched outlet. YourEntertainment Machine isdesigned to operate on householdcurrent, 120-volt 60 Hertz AC. Donot attempt to operate it on DCCurrent.Go to page 9 to Auto Programyour Entertainment Machine.12354Cable to TVCable with Cable Box to TV