Zenith IQD61W20 Operating Manual

Also see for IQD61W20: Operating guide

Zenith IQD61W20 Operating Manual Manual pdf 66 page image

P A G E 6 6 206-3674Remote control doesn’t work.Menu options can’t bechanged or selected.No picture or soundwhen any non-cable sourceis selected.Weak or no Stereo Soundwhen using a stereo VCR.The PIP inset is black orlacks contrast.The PIP inset is “snow” whenthe source is Antenna 1.Time is incorrect.Troubleshooting, cont’d• Make sure the batteries are fresh and installed properly.• Try unplugging your Entertainment Machine for a few minutes,then plug it back in.• Check to see if the source equipment has been turned on.• Make sure that the connections are secure on the back of your EntertainmentMachine and on the source equipment.• Check to see if all the connections are secure.• Look in the Audio mode menu to see if all the settings are correct.• You are using channel 3 or 4 to view your VCR. No stereo sound is presentunder that decision.• You might want to adjust the PIP picture settings under the PIP menu.• Check that all the wires are connected properly.• Check to see if your input source for PIP is set correctly.•Look to see if the TV/VCR button on your VCR has the TV selected or change thePIP to another source.• Make sure the time was set initially. Probably power was lost.