Zenith P50W38 Installation And Operating Manual

Also see for P50W38: Installation and operating guide Service manual Installation and operating guide

Contents

22 Plasma Display PanelOperation1. Press the MENU button and then use D / E button to select the SCREEN menu.2. Press the G button and then use D / E button to select Reset.3. Press the G button.• You can initialize Zoom In/Out, Manual config., Position, Split zoom, PIP size, PIP posi-tion, and sub picture size for twin picture features.Initializing (Reset to original factory value)Initializing (Reset to original factory value)- You can reset values in all modes.- To initialize the adjusted value, follow instructions below.VIDEOAUDIOTIMESCREENTWINSPECIALAuto config.ARCZoom in/outPositionManual config.Screen adj.Reset GXGA ModeTo setMENU Prev.1. Press the MENU button and then use D / E button to select the SCREEN menu.2. Press the G button and then use D / E button to select VGA mode/XGA mode.3. Press the G button and then use D / E button to select the desired VGA/XGA resolution.4. Press the OK button to save.Selecting WSelecting Wide VGA/XGAide VGA/XGA mode (RGB-PC, DVI-PC mode only)mode (RGB-PC, DVI-PC mode only)- To see a normal picture, match the resolution of RGB XGA mode (1024x768, 1360x768, 1366x768) with the selection for XGAmode and the resolution of RGB VGA mode (640x480, 848x480, 852x480) with the selection for VGA mode in the SCREENmenu.- If the input source is RGB VGA mode, the screen menu option is changed from XGA mode to VGA mode automatically.VIDEOAUDIOTIMESCREENTWINSPECIALAuto config.ARCZoom in/outPositionManual config.Screen adj.ResetXGA Mode G1024x7681360x7681366x768MENU Prev.VIDEOAUDIOTIMESCREENTWINSPECIALAuto config.ARCZoom in/outPositionManual config.Screen adj.ResetYNR GOnOffMENU Prev.ScreenScreen Adjustments (VAdjustments (Video, S-Video, S-Video, and Component 480i mode only)ideo, and Component 480i mode only)- Use this function to correct jittering or picture instability during video tape playback.1. Press the MENU button and then use D / E button to select the SCREEN menu.2. Press the G button and then use D / E button to select Screen adj..3. Press the G button and then use D / E button to to select TV or VCR.• Select the VCR option if watching a VCR.• Select the TV option for other equipment.(Except VCR)4. Press the OK button to save.VIDEOAUDIOTIMESCREENTWINSPECIALAuto config.ARCZoom in/outPositionManual config.Screen adj. GResetYNRTVVCRMENU Prev.Screen Menu Options continuedScreen Menu Options continued- Use YNR to reduce the picture noise which may appear on the screen.Luminance Noise Reduction (VLuminance Noise Reduction (Video, S-Video, S-Video and Component 480i modes only)ideo and Component 480i modes only)1. Press the MENU button and then use D / E button to select the SCREEN menu.2. Press the G button and then use D / E button to select YNR.3. Press the G button and then use D / E button to select On or Off.4. Press the OK button to save.Downloaded from www.Manualslib.com manuals search engine