Zenith P50W38 Installation And Operating Manual

Also see for P50W38: Installation and operating guide Service manual Installation and operating guide

Contents

Owner’s Manual 25External Control Device SetupNo. Pin Name1 No Connection2 RXD (Receive data)3 TXD (Transmit data)4 DTR (DTE side ready)5 GND6 DSR (DCE side ready)7 RTS (Ready to send)8 CTS (Clear to send)9 No Connection15692354678RXDTXDGNDDTRDSRRTSCTSTXDRXDGNDDSRDTRCTSRTSPC7-Wire Configuration(Standard RS-232C cable)D-Sub 93256487PDPD-Sub 92354678RXDTXDGNDDTRDSRRTSCTSTXDRXDGNDDTRDSRRTSCTSPC3- Wire Configuration(Non standard)D-Sub 93254678PDPD-Sub 9- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)and control the Monitor’s functions externally.- Connect the serial port of the control device to the RS-232C jack on the Monitor's back panel.- RS-232C connection cables are not supplied with the Monitor.TType of Connector: D-Sub 9-pin Maleype of Connector: D-Sub 9-pin MaleRS-232C ConfigurationsRS-232C ConfigurationsExternal Control Device SetupExternal Control Device SetupR ( )( )( )( ) LRS-232C INPUT(CONTROL/SERVICE)EXTERNAL SPEAKERY PB PR (MONO)R AUDIO LR AUDIO LS-VIDEO AC INPUTAUDIO INPUTVIDEO INPUTAUDIO INPUTAUDIO INPUT REMOTECONTROL COMPONENT INPUTDVI INPUT RGB INPUT RGB OUTPUTDownloaded from www.Manualslib.com manuals search engine