Owner’s Manual 19OperationSpecial Menu OptionsSpecial Menu OptionsVIDEOAUDIOTIMESCREENTWINSPECIALLanguageKey lockISM Method GLow powerSet ID.OSD RotateNormalWhite washOrbiterInversionMENU Prev.VIDEOAUDIOTIMESCREENTWINSPECIALLanguageKey lockISM MethodLow power GSet ID.OSD RotateOnOffMENU Prev.VIDEOAUDIOTIMESCREENTWINSPECIALLanguageKey lockISM MethodLow powerSet ID.OSD Rotate GMENU Prev.Menu Rotation for VMenu Rotation for Vertical Vertical Viewingiewing1. Press the MENU button and then use the D / E button to select the SPECIAL menu.2. Press the G button and then use the D / E button to select OSD Rotate.3. Press the G button and then use the D / E button to select Normal or Rotate.• Select Normal, if the monitor was installed horizontally.• Select Rotate, if the monitor was installed vertically.4. Press the OK button to save.Key LockKey Lock- The monitor can be set up so that it can only be used with the remote control.- This feature can be used to prevent unauthorized viewing by disabling the front panel controls.- This Monitor is programmed to remember which option it was last set to even if you turn the monitor off.1. Press the MENU button and then use D / E button to select the SPECIAL menu.2. Press the G button and then use D / E button to select Key lock.3. Press the G button and then use D / E button to select On or Off.• When you select On, the display ‘ Key lock’ appears on the screen if any buttonon the front panel is pressed.4. Press the OK button to save.VIDEOAUDIOTIMESCREENTWINSPECIALLanguageKey lock GISM MethodLow powerSet ID.OSD RotateOnOffMENU Prev.-In setting Key lock ‘On’, if the monitor is turned off with the remote control, press the INPUT SELECT buttonon the monitor or POWER, INPUT SELECT on the remote control to turn the monitor on.WNormalRotate- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghostimage remaining; even when you change the image. Avoid allowing a fixed image to remain on the Monitor'sscreen for a long period of time.1. Press the MENU button and then use D / E button to select the SPECIAL menu.2. Press the G button and then use D / E button to select ISM Method.3. Press the G button and then use D / E button to select either Normal, White wash,Orbiter, or Inversion.• NormalIf image sticking is never a problem, ISM is not necessary - set to Normal.• White washWhite Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clearentirely with White Wash. To return to normal viewing, press the any button.• OrbiterOrbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoida permanent image on the screen, the image will move every 1 minutes: Right → Right → Downside → Downside → Left→ Left → Upside → Upside.• InversionInversion will automatically invert the plasma display panel color every 30 minutes.4. Press the OK button to save.Low PowerLow Power- Low power reduces the plasma display's power consumption.1. Press the MENU button and then use D / E button to select the SPECIAL menu.2. Press the G button and then use D / E button to select Low power.3. Press the G button and then use D / E button to select On or Off.• When you select On, the screen darkens.4. Press the OK button to save.ISM (Image Sticking Minimization) MethodISM (Image Sticking Minimization) Method