Zenith P50W38H Installation And Operating Manual

Also see for P50W38: Installation and operating guide Service manual Installation and operating guide

18 Plasma Display PanelOperation- Timer function operates only if current time has been set.- Off-Timer function overrides On-Timer function if they are both set to the same time.On/OfOn/Offf TTimer Setupimer Setup1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select Off timer or On timer.3. Press the G button and then use D / E button to select On.• To cancel On/Off timer function, select Off.4. Press the G button and then use D / E button to set the hour.5. Press the G button and then use D / E button to set the minutes.6. For On timer function only, press the G button and then use D / E button to set thevolume level at turn on.7. Press the OK button to save.Auto OfAuto Offf- If there is no input signal, the Monitor turns off automatically after 10 minutes.1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select Auto off.3. Press the G button and then use D / E button to select On or Off.4. Press the OK button to save.12 0030VIDEOAUDIOTIMESCREENTWINSPECIALClockOff timerOn timer GAuto offOnOffVol.MENU Prev.VIDEOAUDIOTIMESCREENTWINSPECIALClockOff timerOn timerAuto off G OnOffMENU Prev.Clock SetupClock Setup- If current time setting is wrong, reset the clock.1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select Clock.3. Press the G button and then use D / E button to set the hour.4. Press the G button and then use D / E button to set the minutes.5. Press the OK button to save.VIDEOAUDIOTIMESCREENTWINSPECIALClock GOff timerOn timerAuto offMENU Prev.TTime Menu Optionsime Menu OptionsSleepSleep TTimerimer- The sleep timer turns the Monitor off at a preset time. Note that this setting is cleared when the monitor is turned off.1. Press the SLEEP button repeatedly to select the number of minutes. First the --- Min option appears on thescreen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.2. When the number of minutes you want is displayed on the screen, press the OK button. The timer begins to countdown from the number of minutes selected.3. To check the remaining minutes before the monitor turns off, press the SLEEP or OK button once.4. To cancel the Sleep Timer, press the SLEEP button repeatedly until --- Min appears.zzzz