Zenith P50W38H Installation And Operating Manual

Also see for P50W38: Installation and operating guide Service manual Installation and operating guide

Owner’s Manual 33Troubleshooting ChecklistNo output from one ofthe speakers • Adjust Balance in the AUDIO menu. (Refer to p.17)Unusual sound frominside the monitor• A change in ambient humidity or temperature may result in an unusual noisewhen the plasma display is turned on or off and does not indicate a fault withthe monitor.No picture &No sound• Check whether the Monitor is turned on.• Is power cord inserted into wall power outlet?• Test the wall power outlet, plug other product’s power cord into the wallpower outlet where the Monitor’s power cord was plugged in.No or Poor coloror Poor picture• Select Color in the VIDEO menu and press the VOLUME (G) button.(Refer to p.16)• Keep a sufficient distance between the Monitor and the VCR.• Activate any function to restore the brightness of the picture.(If still picture is on the screen for more than 5 minutes, the screen gets dark.)The remote controldoesn’t work• Check to see if there is any object between the Plasma Display and theremote control causing obstruction.• Are batteries installed with correct polarity (+ to +, - to -)?(Refer to p.8)• Install new batteries. (Refer to p.8)Picture OK &No sound• Press the VOLUME (G) button.• Sound muted? Press MUTE button.Picture appears slowlyafter switching on• This is normal, the image is muted during the plasma display startup process.Please contact your service center, if the picture has not appeared after fiveminutes.Horizontal/vertical barsor picture shaking • Check for local interference such as an electrical appliance or power tool.TTroubleshooting Checklistroubleshooting Checklist

/ 36

Related manuals for Zenith P50W38