Zenith R45W47 Installation And Operating Manual

Also see for R45W47: Service manual

Owner’s Manual 15OperationSETUPVIDEOAUDIOTIMEOPTIONLOCK Prev.EZ ScanCh.EditDTV SignalCh. Label GMain InputSub InputMENUSelection ( G or )leads you to thechannel logo screen.- Choose preset labels for your channels.- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV channel -even if you didn't preset a label for the channel.1. Press the menu button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Ch. Label.3. Press the G button. You will now see a menu filled with labels and a preview screen.4. Use the ch +/- button to select a channel to label.5. Use D / E / F / G button to select the appropriate label for the channel, then press enter button to set the label to theselected channel.6. Press exit button to return to TV viewing or press menu button to return to the previous menu.Channel Labels SetupChannel Labels Setup- Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input.The higher the signal strength, the less likely you are to experience picture degradation.- Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs.1.Press the signal button.2. View the on-screen signal strength monitor to see the quality of the signal being received.• You can also check the DTV Signal strength with the SETUP menu.DTV Signal StrengthDTV Signal Strength- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected toyour TV.1. Press the menu button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Main Input.3. Press the G button and then use D / E button to select the source: DTV, Analog,Video1, Video2, Front Video, Video4, Component1, Component2, or DVI.4. Press exit button to return to TV viewing or press menu button to return to theprevious menu.Main Picture Source SelectionMain Picture Source SelectionSETUPVIDEOAUDIOTIMEOPTIONLOCK Prev.EZ ScanCh.EditDTV SignalCh. LabelMain Input GSub InputDTVAnalogVideo1Video2Front VideoVideo4Component1Component2DVIMENU