Zenith R45W47 Installation And Operating Manual

Also see for R45W47: Service manual

28 Projection TVOperationMoving the PIPMoving the PIP Sub PictureSub PictureIn PIP mode, use the D / E / F / G buttons to move the sub picture to a different location on thescreen.Adjusting Main and Sub Picture Sizes forAdjusting Main and Sub Picture Sizes for TTwin Picturewin PictureUse the D / E / F / G buttons to change main and sub picture sizes in Twin Picture mode.i.e)1. Press the PIP button to activate the POP mode while in PIP mode.• Channel selection: Use F button to enlarge the selected channel being searched on the POPscreen to shift it for viewing on the Main screen.• POP selection: Use D / E button to select one of 3 POP screen pictures in POP mode.• Input source selection for PIP: Use pip input button or Sub Input option on the SETUPmenu to select an input source for the sub picture (You can’t select DTV for both the main andsub pictures simultaneously). You can only select the Analog or DTV signal for sub inputsource in POP mode.2. Press the exit button to cancel POP mode.POPPOP (Picture-out-of-Picture): Channel Scan(Picture-out-of-Picture): Channel Scan- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,(while the main picture source remains the current channel). The pictures of all the programmed channelsare searched with the 3 POP screen.- Note: Run EZ Scan channel search before using POP mode.F TV 2-0TV 4-0TV 6-0EDPIPPIP (Picture-In-Picture) / POP(Picture-In-Picture) / POP / T/ Twin Picture continuedwin Picture continued