Zenith SENTRY 2 SMS2047W Operating Manual & Warranty

Contents

SETUP MENUCH. (Channel) ADD/DELPurposeLets you add channels to and remove channels from the ac-tive channels found when using the AUTO CH. SEARCHoption. In this way you can customize the channels that areaccessed through CHANNEL (CH) Up/Down.fAUTO CH. SEARCH--> CH.ADD/DELTUNING BANDAUTO FINE TUNECLOCK SETCAPTIONS# CH. ADD/DELCH 2ADDEDPRESS ADJUSTKEY TO CHANGESelecting Ch. Add/Del Ch. Add/Del DisplayTo Add a Channel to Scan Sequence1. Press CHANNEL (CH) Up/Down to go to thenearest channel ABOVE the channel you wish toadd.2. Press SELECT to go down to the channel you wishto add.3. Add channel by pressing ADJUST (ADJ)Left/Right until the display shows ADDED.To Delete a Channel from Scan Sequencel. Press CHANNEL (CH) Up/Down to go to thechannel you wish to remove.2. Delete channel by pressing ADJUST (ADJ)Left/Right until the display shows DELETED.TUNING BANDPurposeAllows for setting the TV channel selector (tuner) to matchyour antenna or cable-TV system.If you are having difficulty tuning channels, the TUNINGBAND may have to be set manually to match your viewingneeds.AUTO CH. SEARCHC1t. ADD/DELw> TUNING BANDAUTO FINE TUNECLOCK SETC,_PTIONSSelecting Tuning BanalTUNING BANDBROADCASTPRESS ADJUSTKEY TO CHANGEJTuning Band DisplayTo Use TUNING BANDPress ADJUST (ADJ) Left/Right to select the tuning bandthat gives you the most channels:• BROADCAST -- is Jsed for standard "over-the-air"broadcasts.• CABLE _ CATV is used for most standard cable-TV(CATV) systems.• CABLE -- HRC is used for cable-TV systems that useHRC (Harmonically Related Carrier).• CABLE -- ICC is use,] for cable-TV systems using ICC(Incremental Coherent Carrier).Available Channels per Ba ndThe channels that are a,,ailable in the broadcast and cabletuning bands are shown below:BROADCAST Band --VHF 2to 13, UHF 14to 69CATV, HRC and ICC Bands-- 1 to 1252731£ 8 _2