THE FIRST TIME YOU OPERATE YOUR TV,STEP 1. CONNECT THE POWERA.Plug your TV into an unswitched AC power source.B.Turn the TV on by pressing OFF-ON.Do not plug TV into switched outlet on aVCR or cable-TV decoderSTEP 2. USE AUTO CH. (Channel) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display• AUTO CH. SEARCHfinds all available channels and stores them in the memoryof the TV. To activate AUTO CH. SEARCH, press AD-JUST (ADJ) Left/Right.AUTO CH. SEARCHPRESS ADJUSTKEY TO STARTSEARCHING FOR CHANNELSAuto Ch. Search Searching for ChannelsReminder DisplayFAWI'O CH SEARCHCH. ADDL)ELTUNING E ANDAUTO FIhETUNECLOCK S[,'TCAPTIONSSetup Menu with AutoCh. Search HighlightedCH 13AUTO CH. SEARCH HAS OOMP_TUNING BAND IS-_ CHANNELS FOUNDSearch is Completed Normal OperationSTEP 3. SET THE CLOCK1. Press MENU repeatedly until the SETUP MENU isshown•2. Press SELECT (SEL) to highlight CLOCK SET.3. Press ADJUST (ADJ) Left/Right to access the sub-menu for CLOCK SET.4. Use numbered buttons on remote control to entercorrect time and TIMER to select AM or PM. Youcan also use ADJUST (ADJ) Left/Right to advancethe 24 hour clock•5. Press ENTER (ENT) to start the clock and returnto normal viewing.AUTO CH. SEARCHCH. ADD/DELTUNINC- BANDAUTO FINE TUNE--> CLOCK SETCAPTIONSSelecting Clock SetfCLOCK SETPRESS NUMBERSOR ADJUST KEYSClock Set DisplayJSTEP 4. USE CH. (Channel) ADD/DELProgram the channels accessed by using CHANNEL (CH)Up/Down. Refer to the CH. ADD/DEL option for details.2731-O 2 -- 1