Zenith SENTRY 2 SY2765 Operating Manual & Warranty

Contents

GET TO KNOW THE REMOTE CONTROL,: MBR3447AUTO FIND OPTIONIf you have tried all the codes listed in the code table for your brand and type of product, and none of those codes operate yourequipment, you can use Auto Find to search for the code you need.Follow these steps for each product you are using:To auto find a code1. Turn the product ON.2. Press and hold PRG until the indicator lights.3. Press the mode key on the remote for the product you want tocontrol: TV, VCR, CABLE, or AUX.4. Enter code 0-(O0, then press ENTER. When the indicator lightflashes three times and remains lit, Auto Find is active.5. Point tile remote toward the product and press and releasePOWER. repeating this action until the product turns OFF.6. Press ENTER immediately to save the code. If your remote failsto operate the functions you use most often, you can re-enterAuto Find and search for a better code.Noles:O The indicator light shouM flash OFF wher_ you pressPOWER and back ON when you release it. If the indicatorlight stays on when you press POWER, Auto Find hastried all available codes. [f you finish Auto Find and theproduct you want to control has not turned off, your remotecannot control that product.O Pressing PRG at any time during the use of Auto Find willcancel Aulo Find, and you will have to start again.Equipment to becontrolledTypical RemoteControl