THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERA.Plug your TV into an unswitched AC power source.B.Turn the TV on by pressing OFF-ON.Do not plug TV into switched outlet on aVCR or cable-TV decoderSTEP 2. SELECT YOUR LANGUAGESelect the language for the on-screen menus. Your optionsare English (ENGLISH), Spanish (ESPAIqOL) or French(FRAN_AIS). The word LANGUAGE always appears inEnglish no matter which language is chosen.1. Press MENU repeatedly on the remote control untilthe SETUP MENU is shown.2. Press SELECT (SEL) to highlight LANGUAGE thenuse ADJUST (ADJ) to choose the desired language.3. Press ENTER (ENT) to return to normal viewing.SETUP MENUAUTO PROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONS•-> LANGUAGE ENGLISHSetup Menu with Language HighlightedSTEP 3. SELECT YOUR VIEWING SOURCEA TV source refers to the equipment connected to the TV.You select the viewing source that supplies the picture andsound to your TV by means of the SOURCE MENU.To Access SOURCE MENU1. Press SOURCE on the remote control to view theSOURCE MENU.2. Press SOURCE repeatedly until the ANT/CABLEsource is highlighted.SOURCE MENU-> ANT/CABLEVIDEO 1VIDEO 23. Press ENTER (ENT) to return to normal viewing.NOTE: ANT/CABLE source must be selected before usingAUTO PROGRAM in order to correctly find availablechannels.STEP 4. USE AUTO PROGRAMWhen your TV is first powered up you will see the AUTOPROGRAM reminder display. AUTO PROGRAM findsall available channels and stores them in the memory of theTV. To activate AUTO PROGRAM, press ADJUST(ADJ) Left/Right.SETUP MENU->' AUTO PROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSLANGUAGESTARTSetup Menu with Auto Program HighlightedDETERMINING TUNING BAND TUNING BAND ISCH _ IS FOUNDDetermining Tuning Band Searching for ChannelsAUTO PROGRAM HAS COMPLETEDTUNING BAND ISr"--"l CHANN ELS FOUNDSearch is CompletedfCH 13STEREONormal Operation2743-0 2 -- 1