Zenith SM2784BT Operating Manual & Warranty

Zenith SM2784BT Operating Manual & Warranty Manual pdf 34 page image

PIP OPERATION AND CONNECTIONSPIP (PICTURE-IN-PICTURE) OVERVIEWYour Zenith "IV must be connected to a video componentsuch as a VCR in order to view a different picture in the PIPinset. This video component must be connected to one of theTV's video/audio input jacks (VIDEO 1 IN or VIDEO 2 IN)by using Audio/Video cables.The most common use of PIP is to view two different chan-nels; one from the TV tuner and the other from the VCR tuner.For example, you can view two sporting events or two moviesat the same time.TYPICAL CONNECTIONSOption 1: Antenna or Direct Cable ConnectionThis illustration shows the basic connection of your TV to astereo VCR. Using this connection, you are capable of the fol-lowing operation:• You may select ANT/CABLE 1 for main picture source toview channels tuned by the TV's channel selector.Simultaneously, you may select VIDEO 1 for PIP source toview -- in the PIP inset -- a tape playing in the VCR or adifferent channel tuned by the VCR's channel selector.(VCR's TV/VCR button must be set to TV.)Sources may also be swapped. In other words, VIDEO 1 maybe the main picture source and ANT/CABLE 1 the PIPsource.Connection From Antennaor Cable-TV SystemOption 1: Antenna or Direct Cable Connection(Optional cables not supplied with television.)(continued on next page)zTa_o 11 -- 1