Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty

Contents

Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty Manual pdf 25 page image

SETUP MENUUSING ADD/DEL/SURFAdded Channels: Channels set to"Added" are tuned when using theCHANNEL Up and Down arrowkeys. All channels which were foundby the Auto Program function areinitially set as "Added" channels.1. Use the Up or Down arrow key tochoose Add/Del/Surf.2.3.4.Select a channel using the numberkeys on the remote.Use the Left or Right arrow toshow Added.Press QUIT to remove the menufrom view.Deleted Channels: These channelsare blocked from tuning when usingthe CHANNEL Up and Down keys.However, they may be tuned directlyby using the number keys on theremote control.1. Use the Up or Downarrow key tochoose Add/Del/Surf.2. Select a channel using the numberkeys on the remote.3. Use the Left or Right arrow toshow Deleted.4. Press QUIT to remove the menufrom view.Surf Channels: "SURF" channels act as a list of favoritechannels, intended for your most frequently watchedchannels. When the "SURF" mode is activated, these arethe only channels that will be tuned while using theCHANNEL Up and Down keys.1. Use the Up or Down arrow key to choose Add/Del/Surf.2. Select a channel using the number keys.3. Use the Left or Right arrow to show Surf.4. Repeat steps 2 and 3 to make your most frequentlywatched channels "Surf" channels.5. Press QUIT to remove the menu from view.To activate "SURF" mode, press the SURF key on theremote control.ISurf's Up! "_'1 appears on the screen.To deactivate "SURF," press SURF again.1I No Surfing (_1 appearsonthe screen.USING CHANNEL LABELSi _i To assign CHANNEL LABELS:1. Select Channel Labels.Select a channel by using the number keys on the remote.Use the Left or Right arrow to sequence through the choicesuntil the desired label appears. (Selecting the dashes specifiesno channel label.)[_ SetupMenuAuto ProgramAdd/Del/SurfCh. Labels ]Clock Set-timer SetupParental CtlCaption/TextLanguageAuto DemoI Ch 2 CBS ]TIMER SETUP: Sleep TimerThe Sleep Timer programs the TV to automatically turn itself Off after a period from 15 minutes up to 4 hours.From Setup Menu1. Make sure the TV's clock is set. 1.2. Select Timer Setup and press the Left or 2.Right arrow to view the Timer Menu.3. Select Sleep Timer.4. Press the Left or Right arrow repeatedly toset the period of time the TV will remainon.One minute before the TV turns off, the GOOD NIGHT display appears on the screen. Atthis time you have a choice of the following two actions:1. Do nothing. The TV will turn itself off in one minute.2. Delay the turn-off by pressing TIMER.Direct From Timer KeyPress TIMER on the remote control.Press TIMER repeatedly to set theperiod of time the TV will remain on.NOTES:13 Before the Timer Menu can be viewed, you must set the time on the TV.See "WHAT YOU SHOULD DO FIRST" in the operating guide.13 To cancel the SLEEP TIMER, turn off the TV or press the TIMER keyrepeatedly until OFF is showing."timerMenuISleep "[imerOn "1"imeOff limeOn/Off "timerI I :30Sleep Timer set to turn TVOff in 30 minutes.I:.: (_::: Good Night* • 60 Seconds"Good Night" display appears60 seconds before shut-off.3130A-O 6-- 2