ON-SCREEN MENUSSUMMARY OF MENU ITEMS (CONTINUED)SOURCE MENUANT/CABLE: Routes the ANTENNA/CABLE source tothe TV for viewing. You see program material from the sig-nal source that is connected to the ANTENNA/CABLEjack on the back of the TV.Selecting VIDEO 1: Routes the VIDEO 1 source to theTV for viewing. You see program material from the sig-nal source that is connected to the VIDEO 1, VIDEO/AUDIO LEFT-RIGHT jacks on the back of the TV.Selecting VIDEO 2: Routes the VIDEO 2 source to theTV for viewing. You see program material from the signalsource that is connected to the VIDEO 2, VIDEO/AUDIO LEFT-RIGHT jacks on the back of the TV.BASIC MENU OPERATIONSVertical Control PanelShown1. To See a Menu or Change MenusPress MENU repeatedly until the desired menu isshown. Example shows choosing the SETUPMENU.SETUP MENU-_ AUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BANDAUTO RNE TUNECLOCK SETCAPTIONSCH. BACKGROUNDSIART2. To Select an Option/Feature on a MenuPress SELECT (SEL) repeatedly until the desiredoption/feature is highlighted. The following ex-ample shows selecting TUNING BAND.SETUP MENUAUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BANDAUTO FINE TUNECLOCK SETCAPTIONSCH. BACKGROUNDCABLE-CAlVSelecting Tuning Band3. To Adjust an Ootion/FeaturePress ADJUST (ADJ) Left/Right to see and choosethe available selections.NOTE: Do not change channels during menuoperations unless instructed to do so in the proce-dures given in this operating guide.4. To Access a Different Main MenuPress MENU repeatedly until the desired menu isshown.5. To Return to Normal ViewingPress ENTER (ENT) or wait a few seconds and theTV will return automatically to normal operation.Service Menus: In addition to the menus shown above,there are menus for factory and field servicing. Servicemenus are not intended for use by the owner.If you inadvertently access a service menu, press ENTER(ENT) to return immediately to normal TV vie_Sng.Choosing Setup Menu2s_7.a 6 -- 2