Zenith Sentry 2 SY2518 Operating Manual & Warranty

Contents

IGET TO KNOW THE REMOTE CONTROL: MBR3447AUTO FIND OPTIONIf you have tried all the codes listed in the code table for your brand and type of product, and none of those codes ope,rate yourexluipment, you can use Auto Find to search for the code you need.Follow these steps for each product you are using:To auto find a code1. Turn the product ON.2. Press and hold PRG until the indicator fights.,3. Press the mode key on the remote for the product you want tocontrol: TV, VCR, CABLE, or AUX.4_. Enter code 0-4) 0, then press ENTER, When the indicator lightflashes three times and remains lit, Auto Find is active.5. Point the remote toward the product and press and releasePOWER, repeating this action until the product turns OFF.6. Press ENTER immediately to save the code. If your remote failsto operate tile functions you use most often, you can re-enterAuto Find and search for a better code.NOTES:ISl The indicator light should flash OFF when you pressPOWER and back ON when you release it. If the indicatorlight stays on when you press POWER, Auto Find hastried all available codes. If you finish Auto Find and theproduct you want to control has not turned off, your remotecannot control that product.ISl Pressing PRG at any time during the use of Auto Find wil!cancel Auto Find, and you will have to start again.Equipment to becontrolledTypical RemoteControl_'_.8-o 3 -- 5