Zenith Sentry 2 Series Operating Manual & Warranty

Also see for Sentry 2 Series: Operation guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty

Contents

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERPlug your TV into an unswitched AC power source.The switched AC outlets found on some video equipment,Mll not continue supplying power to the TV once the equip-ment is turned off. If the power to the TV is interrupted,you will have to set the clock in the TV to the current time. Do not plug TV into switched outlet on calMe-TV decoderDo not plug TV into sa_itched outlet on a VCRSTEP 2. TURN TV ONTurn the TV on by pressing OFF-ON.STEP 3. USE AUTO CH. (Channel) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display. AUTO CH. SEARCHfinds all available channels and stores them in memory foraccess by CIIANNEL (CH) Up/Down. To activate AUTOCH. SEARCH, press ADJUST (ADJ) Left/Right. Whenthe search is complete, you can watch the TV program ofyour choice.NOTES:• The AUTO CH. SEARCH reminder display appearseach time you turn on your TV until it has been used atleast once.• Antenna or cable must be connected to TV hefore you useAUTO CH. SEARCH.SETUP MENU-> AUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BANDAUTO FINE TUNECLOCK SEfCAP11ONSCH. BACKGROUNDSTARTAuto Ch. Search Reminder DisplayDETERMINING TUNING BANDDeterminingTuning BandTUNING BAND ISCH r_ is FOUNDWhile Searching forActive ChannelsAUTO CH. _ HAS OOk'PLE'fED ITUNING BAND IS _C!-_NNELS FOUND_____When Search isCompleteCH 2When Returning toChannel DisplaySTEP 4. USE OTHER OPTIONSYou may want to consider using the following options:• Program the channels accessed by using CHANNEL(CH) Up/Down. Refer to CH. ADD/DEL option of the"Setup Menu" section of this operating guide for details.• Set the clock in the TV. Refer to the CLOCK SET optionof the '"Setup Menu" section of this operating guide fordetails._A 2 -- 1