GB-3EBZ7500GB2. Specification3. Warning labels on the machineFor safe operation and maintenance, symbols are carvedin relief on the machine. According to these indications,please be careful not to make a mistake.4. Symbols onthe machineMODEL EBZ7500Dimensions (LxWxH)** mm 354x492x499Dry weight* kg 10.5Fuel tank capacity liter 2.1Engine type Air-cooled2-cycle gasoline engineDisplacement cm 3 65.6Air filter 2 stage fresh flow filter systemCarburetor Diaphragm, rotary valve typeIgnition system C.D.I.Spark plug NGK CMR7H (Noise-proof)Muffler Spark arrester equippedOperating engine speed rpm 2000 to 7250Fuel consumption liter/h 1.85Air volume* (ANSI B175.2) cu.m/min 21.8Max. Air velocity* (ANSI B175.2) m/sec 105.6* with standard pipe **without pipeSpecifications are subject to change without notice.(1) Read owner’s manual before operating this machine.(2) Wear head, eye and ear protection.(3) Handling this machine improperly could result in accidentscausingserious injury or death. Read this manual carefully andpractice using the blower until you are fully acquainted withall operations and have learned to use it correctly.(4) Severing of fingers or hand by fan bladeDo not open or remove safety guards or nets while engine isrunning.(5) Thrown or blown objectStay a safe distance from the machine.(6) Hot surfaceAvoid contact the hot surface during and immediately opera-tion.Keep all children, bystanders and helpers 15 meters away from the machine.Never modify your machine.We won’t warrant the machine, if you usethe remodeled pruner or if you don’t observethe proper usage written in the manual.If warning label peels off or becomes soiledand impossible to read, you should contact thedealer from which you purchased the productto order new labels and affix them in the re-quired location(s).The port to refuel the “MIX GASOLINE”Position: FUEL TANK CAPThe direction to close the chokePosition: INTAKE CUPThe direction to open the chokePosition: INTAKE CUP01-EBZ7500_GB3lan_212_一.indd 3 12.12.19 1:51:19 PM