Zip HYDROTAP G4 series User Manual

Also see for HydroTap G4 Series: Installation instructions Installation instructions Installation instructions Installation instructions Installation instructions

Contents

28 USER MANUAL805846UK - ZIP HYDROTAP G4 V1.00 NOV 2017TECHNICAL SUPPORT TEWWW.ZIPWATER.CO.UKSECTION 8 LCD SCREEN8.7.6 Dispense timesThe ability to change the maximumdispensing time for both the hot andcold water has been introduced. Thedefault settings for the maximumdispensing times is 15 seconds. Theoperator may change both the hot andcold dispensing times from 5 to 15seconds, in increments of 1 second.• Press the [MENU] button for mainmenu.• Press the [Settings] button.• Enter your 4-digit password andpress [Enter].• Press the [Dispense Time] button.• Select the option to change andscroll using the up and downarrow keys.The HydroTap G4 notifies when filter replacement is due. If you notice one ofthe following, you will need to change the filter.• The white change filter light will flash and remain so until reset.• The filter percentage will show 0% on the home screen.Note Depending on local water quality conditions and usage, the filter mayrequire changing anywhere from 1,000 Ltrs to 10,000 Ltrs. You may alsoneed to replace the filter if you notice unpleasant odours or tastes.Some water may drip from the filter head (socket) during replacement. Keepa towel handy to dry up any drips.• Open the door of the Command Centre.• Relieve system pressure via the filter flush stop cock, a quick open andclose will do. Use the bucket to catch the discharge.• Grasp filter cartridge, rotate the cartridge a quarter turn clockwise, thengently pull down.SECTION 9 FILTER MAINTENANCE9.1 Water filter9.2 Water filter change