Zip HydroTap 801621 User Manual

Also see for HydroTap 801621: User guide

Contents

801621 - B, BA, BHA, BAHA, - HydroTap User Guide - August 2014 - V1.09 Page 11 of 20Caution must be observed when changing any settings within theService Menu as any changes may affect the normal operation ofthe unit. This can only be done by a Zip technician. Please contactyour Zip service provider for further assistance.1. Press the [MENU] button for mainmenu.2. Press the [Service] button.3. A password is required to enterservice menu.G4 HydroTap Service ScreenNote: In Australia call a licensed electrician, plumber,or Zip office on 1800-638-633, for assistance, service, spare parts, or enquiries.D ServiceLCD Screen operation - Section DE SecurityThe Zip HydroTap G4 allows the appliance coordinator to set up a passwordto protect against users changing the preferred system settings.To set a password1. Press the [MENU] button for mainmenu.2. Press the [Security] button.3. Press [Change Password}4. Enter a 4 digit passwordTo change a password1. Press the [MENU] button for mainmenu.2. Press the [Security] button.3. Press [Change Password}4. Enter your old 4 digit password5. Then enter your new 4 digitpassword. You will need toenter your password to accessthe settings screen. If you haveforgotten the password, pleasedisconnect the power and restartyour HydroTap unit.V. - Lux Sensor Calibration1. Press the [MENU] button for mainmenu.2. Press the [Install] button.3. Press the [Lux Sensor Calibration]button.4. The lights on the Tap head will flashto confirm calibration.