Zip HydroTap G4 Celsius Installation Instructions Manual

Also see for Celsius HydroTap G4 range: Installation instructions User manual Installation instructions Installation instructions User guide

Contents

Page 18 of 28 802149UK Celsius residential - Installation instructions -Jan 2016 v2.03Section 5Command-CentreTM installationIf an external filter is installed, select position BBRotate 90°only1234Check the table below to determine which filter bypass position you need for your product.Leave in position A until after commissioning (section 6). Select position B if a scale filter is fitted, beforeflushing the scale filter as described on page 22.5.2 Braided hose fittingInstall the mains water braided hoses to the Command-CentreTM before locating in place.If no external filter is installed, select position AARotate 90°only12345.1 External bypass valveThe diverter bypass valve allows the user to choose to have the boiling feed water bypass the internalfilter and only be filtered by the external filtration. This diverter valve is located at the rear panel of theCommand-CentreTM, see the diagram below.