aci DLP Series Installation & Operation Instructions
Also see for ACCESS series: Installation & operation instructionsInstallation instructions and owner's manualInstallation & operation instructionsInstallation & operation instructionsInstallation and operation instructions
        |
Automation Components, Inc.2305 Pleasant View Road | Middleton, WI 53562Phone: 1-888-967-5224 | Website: workaci.comPage 1Version: 1.0I0000977DLP [CUSTOM RANGES]Installation & Operation Instructions Phone: 1-888-967-5224Website: workaci.comPRECAUTIONS• Do not switch pressure range and outputmode when power is on. Make sure topower off the unit first, then set the DIPSwitches to the correct positions and thenpower on the transmitter.GENERAL INFORMATIONThe DLP Series is based on a piezoresistive,silicon sensing element which senses DifferentialPressure and provides an analog output. Fieldselectable analog outputs include 0-5 and 0-10VDC, or 4-20 mA which correlate to a uni or bi-directional pressure range from 0-0.1" up to 0-30"of water column, depending on your modelselection. Each unit is calibrated to one specificrange based on model number selection. Therange selection dipswitches are referenced onFigure 9 & 10 p. 5-6 and should not be adjusted.MEDIAThe DLP can be used to monitor the differentialpressure in any application that uses dry air orinert gas.-H-LMOUNTING INSTRUCTIONSFind a suitable location for the enclosure. The DLP has 2 two mounting holes located on the top andbottom flanges. Drill pilot holes for the (2) #8 x 3/4" self-drilling screws(supplied). Use the enclosureflange as a guide, or use the dimensions listed in Figure 1. Mount the unit vertically with the brass fittingspointing towards the ground. This ensures that any condensation that may form in the tubing does nothave an effect on the pressure sensor. If mounting the unit horizontally, a slight zero shift may occur andcare must be taken to prevent moisture from building up in the sensor. |
Related manuals for aci ACCESS series
This manual is suitable for:
ACCESS series147384147422147423147430147440147445147458147463147467147472148403A/DLP-002-W-U-D-A-0A/DLP-002-W-U-N-A-0A/DLP-003-W-U-D-A-0A/DLP-003-W-U-N-A-0A/DLP-004-W-U-D-A-0A/DLP-004-W-U-N-A-0A/DLP-005-W-U-D-A-0A/DLP-005-W-U-N-A-0A/DLP-015-W-U-D-A-0A/DLP-015-W-U-N-A-0A/DLP-020-W-U-D-A-0A/DLP-020-W-U-N-A-0A/DLP-025-W-U-D-A-0A/DLP-025-W-U-N-A-0A/DLP-030-W-U-D-A-0A/DLP-030-W-U-N-A-0A/DLP-2D5-W-U-D-A-0A/DLP-2D5-W-U-N-A-0A/DLP-D10-W-U-D-A-0A/DLP-D10-W-U-N-A-0A/DLP-D25-W-U-D-A-0A/DLP-D25-W-U-N-A-0A/DLP-D50-W-U-D-A-0A/DLP-D50-W-U-N-A-0
manualsdatabase
Your AI-powered manual search engine