daltile 1048BRS Operating Manual
                    | |
UNPACKING AND SETTING UPUnpacking and Assembly● Unpack the tile saw and inspectfor any damaged parts.● Install the legs in the sockets at theunder side of the water container andfasten with the knobs. Markings showthe right position.● Level the tile saw by adjusting thelegs in the sockets and make sure itsstable.● Release the transportation lock.Setting the Cutting Depth:● By loosening the knob the saw head canbe positioned at the desired height.The saw head is tightened by a springand may accidentally jump up when theknob is loosened.Cooling SystemOperating the water pump without a suf-ficient supply of water may result in pumpdamage.● Place the plug in the drain of the watercontainer.● Fill the container with water until thewater pump is completely submerged.Connecting to Power SupplyBefore connecting the machine make surethat:● the line voltage corresponds with thedata on the machine’s specificationsplate,● there is a grounded power supply,● the extension cord’s meets criterea asmentioned in the table on page 10.Motor ProtectionThe motor is equiped with a thermal safetyswitch for protection against an overload.When the motor gets overheated, the switchfalls back into its initial position and can onlybe switched on again after the motor hascooled down.PAGE 12 DALTOOL 1048BrS OPERATING MANUAL V02/2008R1Transportation Lock |
Related manuals for daltile 1048BRS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine