dbx DriveRack 220i User Manual

Also see for DriveRack 220i: Manual User manual

dbx DriveRack 220i User Manual Manual pdf 15 page image

11220iDriveRack® User Manual2.4 - ConfigurationConfiguration of the DriveRack units is done in Unit view. The DriveRack 220i configuration canbe changed by clicking on the CONFIG button. Once the CONFIG button has been clicked, themodules can be changed by right clicking on the module to be changed. For example, if you want tochange the processing module in one of the inserts, you simply right-click on that module and you willbe able to select another processing block as well as unlink that module (if it is stereo linked). To linkmodules in stereo, click on one of the module that you want to link. While holding the Ctrl button clickthe other module that you want to link it to; both modules should now be highlighted. By right-clickingon either module you can now select LINK. Once the desired configuration is created you must click theCONFIG button once more to load the configuration.2.5 - EditingTo edit a processing module double click on that module. Adjust the module to taste; make sure thatthe module is engaged, this is usually indicated by the module on button in the upper left corner of theparameter section. Although process editing is done in real-time, the changes can either be discarded oraccepted by selecting the OK or CANCEL button.Software Operation Section 2