dbx DriveRack 220i User Manual

Also see for DriveRack 220i: Manual User manual

dbx DriveRack 220i User Manual Manual pdf 38 page image

34220iDriveRack® User ManualThe Utility section of the DriveRack 220i gives you the ability to perform several keyoperational functions including: custom Program List creation, Zone Controller set-tings, and front panel lockout mode selection. Use this section of the manual to makeyourself familiar with all aspects of the Utility menu of the DriveRack system.4.1 - Program List/Program ChangeThe 220i allows you to set the unit to either scroll through programs in a sequential manner, or createcustom program lists from within the Utility menu. This list makes it convenient for restricting access toa small list of programs. The procedure for setting up the program list is as follows.Open the Utility menu by clicking on Edit on the Menu Bar, and selecting Utilities.To create a custom Program list first, select the desired list size by using the up and down arrows to theright of the Program List Size indicator.Select the programs in the list by clicking on one of the programs then use the up and down arrows atthe bottom of the window to select which program from the user program table you want.4.2 - ZC SetupThis feature gives you the ability to create a custom interface for the end user and program that interfacefor either program selection or output level and mute.The Zone Controllers offer additional utility to the DriveRack® 220i. They allow real-time adjustment ofoutput levels, mutes and program changes from simple wall panel interfaces. On the 220i, a maximumnumber of six Zone Controllers may be used and they may be nested, in other words, one controllermay be used for a single zone and then another controller may be used for the entire venue or system.With a maximum distance of up to 1000 ft. on CAT5 cable with RJ-45 connectors, the Zone Controllersoffer an easy to program and use remote control surface.UtilitiesSection 4