dbx DriveRack 480 User Manual
Also see for DriveRack 480: User manualMonitor application guideUser manualSpecificationsUser manual
                                                                                                                                             | |
Contents
| 
Getting Started®DriveRack™ User Manual2Section 1 DriveRack ™IEC Power Cord ReceptacleThe 480 comes with an International power supply that will accept voltages ranging from 100V-240V at frequencies from 50Hz-60Hz. An IEC cord is included.MIDI In, Out and Thru ConnectorsThese connectors provide MIDI functionality to the 480 DriveRack™. The In, Out and Thru jacksallow you to use the 480 DriveRack™ at any point in the MIDI chain.RS485 Control Bus Input (DB-9 connector type)This input network connection is used to receive information being sent from other units in theDriveRack™ network link.RS485 Control Thru Bus (DB-9 connector type)This Thru network connection is used to pass information to other units in the DriveRack™ net-work link.RS485 Control Bus Input (RJ-45 connector type)This input network connection is used to receive information being sent from other units in theDriveRack™ network link.RS485 Control Thru Bus (RJ-45 connector type)This Thru network connection is used to pass information to other units in the DriveRack™ net-work link.Termination LEDsThese LEDS indicate when network is properly terminated. The Green LED indicates that thenetwork has been correctly terminated.Remote Controller In ConnectionThis DB-9 type input connection is used to send and receive information from the 480R RemoteControl unit.PC ConnectionThis DB-9 type connection is used to send and receive information to and from the GUI inter-face.Outputs 1-8The output section of the 480 DriveRack™ offers eight electronically balanced XLR connectors.35 WATTS1.1 Rear Panel Connections (480) |
Related manuals for dbx DriveRack 480
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine