®Navigating the "Dynamics" SectionThe PARAMETER knobs are usedto edit parameter values1 2 3The DYNAMICS buttontoggles throughthe Dynamicsmodules used ineach channel ofthe selectedprogram.DYNAMICS CompressorPeakstopOver EasyDYNAMICSThresholdRatioGainDynamics (Mono Compressor)To edit the parameters of the Dynamics module used in a selected program, simply use the following procedure. From program mode,either press the X-OVER button or use the Parameter 2 or 3 knobs to move to the Dynamics module. Once you have reached the Crossover module,press either Parameter button to enter the module. Successive presses of DYNAMICS button will movethrough each channel that utilizes a Dynamics module. Navigate through the Pages of the selected Dynamics module by pressing the"Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.2.10 Navigating the Dynamics SectionEditing Functions Section 2DriveRack ™21DriveRack™ User Manual
