WARNING FOR YOUR PROTECTIONPLEASE READ THE FOLLOWING:KEEP THESE INSTRUCTIONSHEED ALL WARNINGSFOLLOW ALL INSTRUCTIONSTHE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECTFILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED ON THE APPARATUSCLEAN ONLY WITH A DRY CLOTH.DO NOT bLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THEMANUFACTURER’S INSTRUCTIONS.DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES,OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER.UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONGPERIODS OF TIME.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has twoblades with one wider than the other. A grounding type plug has two blades and a third groundingprong. The wide blade or third prong are provided for your safety. If the provided plug does not fityour outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience recep-tacles, and the point where they exit from the apparatus.Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with theapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoidinjury from tip-over.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operatenormally, or has been dropped.MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount or installation whereplug is not accessible, an all-pole mains switch with a contact separation of at least 3 mm in eachpole shall be incorporated into the electrical installation of the rack or building.FOR UNITS EqUIPPED WITH ExTERNALLY ACCESSIbLE FUSE RECEPTACLE: Replace fuse with sametype and rating only.MULTIPLE-INPUT vOLTAGE: This equipment may require the use of a different line cord, attachmentplug, or both, depending on the available power source at installation. Connect this equipment onlyto the power source indicated on the equipment rear panel. To reduce the risk of fire or electric shock,refer servicing to qualified service personnel or equivalent.SAFETY INSTRUCTIONSNoTICe FoR CUSTomeRS IF YoUR UNIT IS eqUIPPeD WITh A PoWeR CoRD.WARNING: ThIS APPLIANCe ShALL Be CoNNeCTeD To A mAINS SoCKeT oUTLeT WITh APRoTeCTIVe eARThING CoNNeCTIoN.The cores in the mains lead are coloured in accordance with the following code:GREEN and YELLOW - Earth bLUE - Neutral bROWN - LiveAs colours of the cores in the mains lead of this appliance may not correspond with the colouredmarkings identifying the terminals in your plug, proceed as follows:• The core which is coloured green and yellow must be connected to the terminal in the plugmarked with the letter e, or with the earth symbol, or coloured green, or green and yellow.• The core which is coloured blue must be connected to the terminal marked N or colouredblack.• The core which is coloured brown must be connected to the terminal marked L or colouredred.This equipment may require the use of a different line cord, attachment plug, or both, dependingon the available power source at installation. If the attachment plug needs to be changed, referservicing to qualified service personnel who should refer to the table below. The green/yellowwire shall be connected directly to the units chassis.CONDUCTOR WIRE COLORNormal AltL LIVE BROWN BLACKN NEUTRAL BLUE WHITEE EARTH GND GREEN/YEL GREENWARNING: If the ground is defeated, certain fault conditions in the unit or in the system towhich it is connected can result in full line voltage between chassis and earth ground. Severeinjury or death can then result if the chassis and earth ground are touched simultaneously.The symbols shown above are internationally accepted symbols that warn ofpotential hazards with electrical products. The lightning flash with arrowpoint inan equilateral triangle means that there are dangerous voltages present withinthe unit. The exclamation point in an equilateral triangle indicates that it isnecessary for the user to refer to the owner’s manual.These symbols warn that there are no user serviceable parts inside the unit.Do not open the unit. Do not attempt to service the unit yourself. Refer allservicing to qualified personnel. opening the chassis for any reason will voidthe manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on theunit, shut it off immediately and take it to a dealer for service. Disconnect theunit during storms to prevent damage.IMPORTANT SAFETY INFORMATION