dbx Zone Pro 640 User Manual

Also see for Zone Pro 640: Manual Installation guide Manual 

dbx Zone Pro 640 User Manual Manual pdf 21 page image

®System Setup Section 3ZonePro ™13ZonePro™ User Manualcontroller, then select the desired zones with each of the 16 switch positions. Like a ZC-3, theZC-7 only has four positions so it will only support up to four zones or groups of zones, but itdoes have momentary switches that can be used in a push to call fashion, where each switchmust be pushed and held to route the page to that zone or group of zones. First, select themicrophone to be steered, then for each switch position choose the zones or groups of zonesthat are to be paged. Once you have performed all your zone controller configurations, clickNEXT to move to the Routing Configuration.3.2.4 Routing Setup• The Routing Setup Page allows selection of the main Source, the Priority override source,the Page source, and the output level for each of the output zones. If Zone Controllers areused for either source selection or level control, these should be selected in the Source orLevel pulldown menu. If zone controllers are being used for Page Steering select None inthe Page menu for those outputs unless a microphone is always paging to that zone inaddition to the page steering.