dbx Zone Pro 640 User Manual
Also see for Zone Pro 640: Manual Installation guideManual
                                                           | |
Contents
| 
Detailed Parameters®ZonePro™ User Manual32Section 4 ZonePro ™PeakstopPlus® On/OffThe first stage of PeakStopPlus is the Instantaneous Transient Clamp™ which clamps the signalwith a soft logarithmic clamp function. This logarithmic function ensures that the signal will notexceed the level set by the PeakStopPlus OVERSHOOT control by more than the overshootamount, and that it will not introduce harsh artifacts. The second stage is a unique program lim-iter featuring Intelligent Predictive Limiting™. Its function is to monitor the input signal andintelligently predict the amount of gain reduction needed to keep the output signal below theceiling set by the Instantaneous Transient Clamp™.Overshoot 1-6This parameter sets the amount of overshoot for the Instantaneous Transient Clamp™.The parameters for the delay are as follows and are user adjustable:Delay On/OffTurns the delay module on and off.LengthSets the amount of delay time. Maximum delay time is 650ms.Units Seconds, Feet or MetersSelects the unit of measurement for the delay.Polarity Normal or InvertThis section is used to select either the Positive or Negative polarity.4.15 - Output4.14 Delay |
Related manuals for dbx Zone Pro 640
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine