eBridge eBridge8E Installation Manual
        | |
www.altronix.com - 2 - eBridge8E / eBridge800EOverview:The eBridge8E/eBridge800E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and multi-port EoC (Ethernet over Coax) receiver into a singleintegrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full powerper port (240W total). Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control, and report power anddiagnostics from anywhere.Features:Installation Instructions:Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes andauthorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.eBridge8E/eBridge800E is not intended to be connected to outside plant leads and should be installed indoors withinthe protected premises. eBridge8E/eBridge800E is intended for indoor use only. If battery bracket isremoved, then the unit must be installed in a restricted access area (Fig. 1b, pg. 2).Agency Listings:• UL/cUL Listed for Information Technology Equipment (UL 60950-1).• CE approved.Input:• 115VAC, 60Hz, 3.25A or 230VAC, 50/60Hz, 2.0A.Power Output:• Eight (8) power-limited ports up to 30W max. full power per port.240W total power.• Generates PoE/PoE+ up the coax to eBridge transceiver.Ethernet over Coax:• Speed: 10/100BaseT, half/full duplex, auto negotiation.• eBridge8E: Each port rated at 25Mbps at distances up to 500m.eBridge800E: Each port rated at 100Mbps at distances up to 300m.• Connectivity: BNC, RG-59/U or similar.Ethernet Uplink Ports:eBridge8E:• 1Gb uplink (100/1000 Mbps) (2x 1Gb pending).eBridge800E:• Two (2) 1Gb uplink (100/1000 Mbps).• Connectivity: RJ45, auto-crossover.• Wire type: 4-pair CAT5 or better structured cable.• Distance: up to 100m.LED Indicators:• Blue LED - Coax link connection.• Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.• Green LED - Power.Battery Backup:• Built-in charger for sealed lead acid or gel type batteries.• Automatic switch over to stand-by battery when AC fails.Environmental:• Operating Temperature: -10ºC to 50ºC (14ºF to 122ºF).• Storage Temperature: -30ºC to 70ºC (-22ºF to 158ºF).Environmental (cont’d):• Humidity: 20 to 85%, non-condensing.Accessories:• RE2: Rack Mount Battery Enclosure.Applications:• Eliminates the costs and labor associated with installing new network cabling.• Retrofit digital IP cameras in an analog CCTV installation.• Works with Megapixel, HD720, HD1080 & VGA (SD) cameras (see note, pg. 2).• Extend Network link distance in an industrial environment.• Upgrade deployed CCTV Coax to a digital networkfor Retail, Casinos, Airports, Schools, Hospitals, etc.LINQ Technology:• SSL (Secure Socket Layer) security encryption.• User level security.• Built-in IP management allows for remote camera reset and monitoring.• Provides local and/or remote access to critical information via LAN/WAN• Email and Windows Dashboard Alert notifications report real-time diagnostics..• Event log tracks history.Compatible Transceivers (see Step 6, pg. 3):eBridge8E:• eBridge1PCTX: Single port ethernet/PoE or PoE+ 25Mbps transceiver.Power consumption: 1.5W.• eBridge1ST: Single port ethernet/PoE or PoE+ 25Mbps mini-transceiver.Power consumption: 1.5W.eBridge800E:• eBridge100TM: Single port ethernet/PoE or PoE+ 100Mbps transceiver.Power consumption: 1.5W.• eBridge100ST: Single port ethernet/PoE or PoE+ 100Mbps mini-transceiver.Power consumption: 1.5W.Mechanical:• Dimensions (H x W x D approx.): 1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm)Fig. 1a Fig. 1b |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine