4200 SVR Exit DeviceInstallation InstructionsI-ED01626Rev 1, Rev Date: 07/29/14 Page 1 of 6Vertical CenterlineSingle Device Two Vertical Rod Devices Vertical Rod and Rim DeviceTools and Hardware RequiredDoor Handing Horizontal Centerline=>40mm =>40mm =>40mm ~5mm4.5~7mm56mm18mm1000mmfrom finishedfloor3.5mm &4mm4.2mmM5-0.8For wood doors, drill3.5mm hole4.2mm drill, M5-0.8 tapDrill 5mm thru from deviceside. Drill 7mm from otherside (pull side).Check building and fire codesto see if your applicationrequires the use of sleevenuts and bolts.50mm

hager 4200 SVR Exit Device Installation Instructions Manual