hager WXH21 Series Manual

Also see for WXH20 Series: Manual

Contents

hager WXH21 Series Manual Manual pdf 23 page image

ee4544Power supply to the cooker is switched off and switched on againimmediately.Cause: Power control unit is connected incorrectly.Check that the connection of the cooker supply cable and cooker connec-tion cable have the right terminal assignment (IN/OUT).Water leakage alarm triggers.Cause: The leakage sensor is not sufficiently dried or is dirty.Dry or clean water leakage sensor.Sensor unit does not react when button is pressed.Cause 1: Battery charge too low.Replace batteries.Cause 2: Batteries are not inserted correctly.Check that the batteries are in the correct position according to the markingon the bottom of the battery compartment and correct the position if neces-sary.The fault signals that possibly occurred and their problem description are listedin table 6.Status LED (5) flashes blue Problem description● Problem with the radio connection●● Problem with the power control unit●●● Power control unit is overheatedStatus LED (5) flashes yellow Problem description● Problem with the sensors●● Problem with the sensor unit●●● Wrong mounting position of the sensor unitTable 6: Fault signal6.3 AccessoriesWater leakage sensor WXH202KNX radio binary input 2gang flush-mounted TRB302AKNX radio binary input 2gang flush-mounted 230 V TRB302B„ “