Date : 20/09/20126T 8207-02atebis touch panel User ManualUSE12- Click on the ‘Learn’ key in the scene device and wait a few seconds until learning is completed. If the learningprocedure has worked correctly, the devices concerned confirm learning (On/Off for a lighting unit, up/down for ablind, etc.).- Check that the scene is running by clicking on ‘Read’.2.1.6 Priority commandPriority allows you to order your appliances to override all other commands and to maintain the status of these appliancesuntil cancellation of this mode. The various appliances in your system have been assigned to this command by yourinstaller.By clicking on the symbol, you will activate the priority.From this moment on, the system trips your appliances inthe status defined by your installer and remainsunchanged. No other commands will be acted upon as longas you have not unlocked the system by clicking on thesymbol. In addition, the symbol will appear at the top ofthe screen indicating that the system is locked.2.1.7 Miscellaneous commandsIn addition to the conventional lighting and shutter commands, tebis touch panel has various commands for otherapplications like opening a gate or triggering the alarm. The parameters for these devices have been set by yourinstaller and may take various forms depending on the application. The system has 4 different types:ALARM: Used to activate your alarm system with indicationof the operating status.and : the system is activated.only: the system is deactivated.START/STOP: Used to start/stop any appliance other thana lighting unit or a shutter. For example, you can control aventilation unit or a sprinkler system.PULSE: Used to trigger an automatic system that requiresa pulse command like opening a gate or a garage. Thepulse time has been set by your installer according to theneeds of the appliance to be controlled.DEAD-MAN CONTACT: Used to control a system thatrequires physical contact for safety reasons like aswimming pool cover, for example.