hager tebis User Manual
Also see for tebis: Installer manual
                              | |
Contents
| 
Date : 20/09/20126T 8207-02atebis touch panel User ManualCUSTOMISATION24- In the 'Configuration Menu', select: Touch screencalibration.A program is started, which invites you to calibrate thescreen by clicking on the cross.Message: Carefully press and briefly hold stylus on thecentre of the target.Repeat as the target moves around the screen.After calibration, touch the screen to save the newconfiguration.Otherwise, wait 30 seconds to keep the previous settings.3.3.10 Physical addressUsed to set the time zone and activate summer/winter mode.- In the 'Configuration Menu', select: Physical address.- Click on to activate the physical address.- From the ETS program, in the topology for your project,select your tebis touch panel.- By right-clicking on the mouse, select Download followedby Program Individ. Address.Programming is complete when the tebis touch paneldisplays the new physical address.- Click on to exit the menu.Comment: After programming the new physical address, the addressing mode is automatically deactivated.3.3.11 Return to factory settingsIs used to reset the configuration of the tebis touch panel to restore the default parameters.- In the 'Configuration Menu', select: Return to factory settings- Click on ‘YES’ to confirm your choice or ‘NO’ to go back to the menu.The system will reload the ex works configuration and reboot.Comment: Your application and the password to access the parameters and configuration menus will be deleted.Carefully press and briefly hold stylus on the center of the target.Repeat as the target move around the screen. |
Related manuals for hager tebis
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine