halstrup-walcher KAL 100 Instruction Manual
Also see for KAL 100: Instruction manual
                            | |
Contents
| 
Instruction Manual KAL 100/2002510 TroubleshootingProblem Cause Corrective ActionInstrument is notfunctioning, display isdarkNo power Check to see if the electrical cord is plugged inproperly at the inlet for non-heating apparatus Switch on instrument at the primary switch (onrear panel) Check fuse; replace if necessaryCaution: Unplug power cord!Instrument does notreach set pressure;pump runscontinuouslyLeak in the system,diameter of tubing toolarge Secure tubing properly; eliminate any leaks Maximum tubing diameter 5 mm11 Technical dataMeasurement dataMeasurement ranges 0-100 Pa, 0-1 kPa, 0-10 kPa, 0-100 kPaOverpressure range 20 %Overload capacity 600 kPa for 10 kPa and 100 kPa measurement ranges200x for 100 Pa and 1 kPa measurement rangesLinearity based on apressure/measurement range of 0...100% at +17…+27°C±0.1 % ±1 digit±0.3 % (at 100 Pa)±0.1 % (at 1…100 kPa)Hysteresis 0.1 %Resolution 0.01 % of the final valueTemperature-dependent drift in zeropointnone (cyclic zeroing)Temperature-dependent drift inmeasurement range0.03 % / KVoltage input 0..10V, Ri approx. 40 kOhm, accuracy: +/-0.2% of the finalvalueCurrent input 0..20mA, output load 240 Ohm, accuracy: +/-0.2% of thefinal value |
Related manuals for halstrup-walcher KAL 100
manualsdatabase
Your AI-powered manual search engine