iDect Boomerang Plus User Manual

Contents

iDect Boomerang Plus User Manual Manual pdf 35 page image

359 CLOCK AND ALARM SETTINGS9.1 Date and Time SettingsIf you have subscribed to the Calling Line Identification service, the timeand date settings will be automatically updated by the network when youreceive an incoming call, but you may still need to set the correct year.You can also set the date and time manually.1. From the home screen, press M.2. Press + or - to CLOCK&ALARM and the press M to select.3. Press M again to select DATE & TIME.• The last stored date is displayed, with the third digit of the yearflashing.4. Enter the current date and press M to confirm.Enter the date in the format YY/MM/DD, e.g.03 May 2014 as [1], [4],[0], [5], [0], [3].If you make a mistake, press m to go back to the previous digitentered.5. Enter the current time and press M to confirm. The default timeformat is 24 HOURS. (To change the time format, see 9.1.1 Changethe Time Format.)For 24-hour format, enter 1:30pm as [1], [3], [3], [0].For 12-hour format, enter 1:30 am or pm as [0],[1],[3],[0] and thenpress + to select am , or press - to select pm.If you make a mistake, press m to go back to the previous digitentered.• A confirmation tone is played.6. Press O to return to standby mode.