idi ilex 55 Installation Manual

Also see for Ilex 55: Installation guide Operator's manual

Contents

idi ilex 55 Installation Manual Manual pdf 13 page image

Installation Guide ilex55L280-0974 REV A www.imagediagnostics.com Page 11Typical cropped sizes for a 1920 x 1080 starting aspect ratio, which is what the DAUs are set to output. This should be astarting point and can be adjusted as required for each window/channel1920 1080X1 Y1 X2 Y2 Aspect multiplier240 0 1680 1080 4:3 1.330 0 1920 1080 16:9 1.777778420 0 1500 1080 Square 1285 0 1635 1080 1280x1024 1.25DisplayPort inputs are directly connected to the back of the MSV2 and should output the exact aspect ratio ofthe video source.5.6. Click apply and note changes on the video screen. Adjust values as required.5.7. Repeat for each channel CH2, CH3, & CH45.8. Verify keep aspect ratio is turned on for each channel as wellRename Layouts and Channels6. Renaming will occur in the Preset & Channel tab6.1. Click on the preset & Channel tab6.2. In the top click on the drop-downmenu and navigate to thedesired preset & channel.6.3. Click in the Preset Name textbox6.4. Type in the desired name.6.5. Note: Use only letters andnumbers, symbols are notallowed and will create errorsin the programming6.6. Click apply6.7. Rename each of the layouts as required, remember to click apply after renaming each of the layouts.6.8. Channels can also be renamed in the same fashion.6.9. Repeat steps 6.2 through 6.7, except select the desired channel in step 6.2Saving and returning to guest mode7. Go to the design tab7.1. Hit the save button7.2. Click on the sign out button at the top right of the page7.3. Sign back into software using the following (case sensitive on both username and password)7.3.1. Username: idi7.3.2. Password: Password55