Installation Guide ilex55L280-0974 REV A www.imagediagnostics.com Page 7Accessing Onscreen KeyboardWhen a keyboard is not used it is still possible to bring up the onscreen keyboard.1. Press and hold anywhere on the screen until the “x” appear at the top of the screen. Click on the “x”.1.1. On the taskbar at the bottom of the screen, click on the icon that looks like a keyboard1.2. Click on the icon in the top right of the keyboard to undock it. Now thekeyboard can be moved around the screen1.3. Click in the bottom right of keyboard on the icon 123 to get the numberpad to appear1.4. Click the “x” in the top right-hand corner of the keyboard to close it out1.5. Once keyboard use is complete, click on the screen.1.6. Click the three dots in the top left corner of the web browser1.7. Click the square next to the zoom buttons to bring the monitor back intoFullscreen mode.Modifying LayoutsLog in as an administrator2. To login as admin click in the top right corner of the screen, click the door with an arrow point right to sign out.Connect keyboard to the tablet or access the on-screen keyboard as described in previous section.2.1. Login in with the following credentials (case sensitive, and don’tforget exclamation at end)2.1.1. Username: admin2.1.2. Password: 123123123!2.2. To login as guest/operator mode use the following credentials(case sensitive, and don’t forget exclamation at end)2.2.1. Username: idi2.2.2. Password: Password553. In general, always remember to Click apply and save, otherwise work will be lost.3.1. There are 5 possible user set layouts that can be adjust the size, and location of windows (User0,1,2,3,4)There are 3 program defined layouts that cannot be adjusted (Quad, 3Side, and 3 Bottom)3.1.1. Start in Design mode (at the top of the page, 3rd tab, icon is 4 squares)