|
131.4 LCD panel display & button operationSMART-50 printer can show the real-time process status to user. SMART-30’s status is displayed in windows tray.No LCD Display LED Button State DescriptionLeft Right Left Right1 Ver X.XX…Initialize… On On Initializing Initializing with the indication of SMART-50 firmware version2 INIT Error xx Replay> Blinking Blinking Repeat Repeat Error during initializingShowing error no. in case of failure of normal initializing whileSMART-50 is initialized. (Refer to page13). Press any keys for re-initializing process.3 S m a r tAuto Ribbon Set On On Automatic ribbon setting It optimizes the ribbon position setting automatically in case of thereplacement of color ribbon(YMCKO or YMCKOK).4 Auto Ribbon SetFail!!!! Blinking Blinking Fail to optimize theribbon settingDisplay these messages when the auto ribbon setting is failed andit shows the ribbon detecting level.5 Auto Ribbon SetColor=xxx(xxx) Blinking BlinkingFail to optimize theribbon setting anddisplay the ribbon’s colorvalue6 S M A R TSystem Ready On OnInstalledribboninformationSoft powerON/OFF StandbyPrinter is ready for printing and you can check the installed ribboninformation by pressing the left button. Printer turns off by pressingthe right button. Printer turns on by pressing the right button when itturns off.7 Wait.. 1”CTemperature=xxx Blinking BlinkingPrinter’s operatingtemperature is under1℃Shown it when printer’s operating temperature falls down under1℃. Normal operating temperature is 15℃~35℃.8 S m a r tUnlock Please.. On On Printer is locked Physical key option is active using the CardPrinterSetup utility andit shows the locked state. Unable to print.9 S m a r tVerify your PC On On PC is not authenticatedAuthentication option is active using the CardPrinterSetup utility.When use the printer with an unauthenticated PC, it is shown.Printer is not working.10 Ribbon BalanceType / Remains On On Card out Display the ribbon typeand remainsDisplay the installed ribbon’s type and the remains. It can be shownby pressing the left LED button on the system ready mode.11 S M A R TPrinting! On On Printing Under printing.
|
