janitza 800-CT8-A User Manual And Technical Data

Also see for 800-CON: User manual and technical data User manual and technical data Installation manual

Contents

janitza 800-CT8-A User Manual And Technical Data Manual pdf 11 page image

www.janitza.de11Modules 800-CT8-A | 800-CONWARNINGRisk of injury due to electrical current and voltage!Severe bodily injury or death can result! Thereforeplease abide by the following:· Do not touch bare, stripped wires or deviceinputs that are dangerous to touch on thedevices, components and modules.· Switch off your installation before commencingwork! Secure it against being switched on!Check to be sure it is de-energized! Ground andshort circuit! Cover or block off adjacent liveparts!· During operation and troubleshooting(especially with DIN rail devices), check theenvironment for dangerous voltages and switchthese off if necessary!· Wear protective clothing and protectiveequipment in accordance with applicableguidelines when working on electrical systems!· Before making connections, ground the device/ component / module by means of the groundwire connection, if present!· Do not touching bare or stripped leads that areenergized! Equip stranded conductors with wireferrules!· Hazardous voltages can be present in allcircuitry parts that are connected to the powersupply.· Protect wires, cables and devices with asuitable line circuit breaker/fuse!· Never switch off, remove or tamper with safetydevices!· There can still be hazardous voltages present inthe device or in the component (module) evenafter it has been disconnected from the supplyvoltage (capacitor storage).· Do not operate equipment with currenttransformer circuits when open.· Only connect screw terminals with the samenumber of poles and design!· Do not exceed the limit values specified inthe user manual and on the rating plate! Thismust also be observed during testing andcommissioning.· Take note of the safety and warning noticesin the usage information that belongs to thedevice, components or modules!2.3 Product safetyThe devices, components and modules reflectcurrent engineering practice and accepted safetystandards, but hazards can arise nonetheless.Observe the safety regulations and warning notices.If notices are disregarded, this can lead to personalinjury and/or damage to the product.Every type of tampering with or use of the devicesand the modules,· which goes beyond the mechanical, electrical orother operating limits can lead to personal injuryand/or damage to the product;· constitutes "misuse" and/or "negligence" under theproduct’s warranty and thus voids the warranty forany possible resulting damage.Read and understand the user manual and the usageinformation on the basic device before installing,operating, maintaining and using the devices,components and modules.Only operate the devices, components and moduleswhen they are in perfect condition and in compliancewith this user manual and the usage information thatis included. Send defective devices, componentsor modules back to the manufacturer in compliancewith proper transport conditions.Retain the user manual throughout the service life ofyour product and keep it at hand for consultation.When using the device, component or module, alsoobserve the legal and safety regulations for yoursystem that are applicable for the respective usecase.2.4 Hazards when handling the device,components and modulesWhen operating electric devices, componentsor modules, it is unavoidable for certain partsof these devices to conduct hazardous voltage.Consequently, severe bodily injury or materialdamage can occur if they are not handled properly.Therefore, when handling our devices, components,or modules, always observe the following:· do not exceed the limit values specified in the usermanual and on the rating plate! This must also beobserved during testing and commissioning!· Take note of the safety and warning notices inall usage information that belongs to the device,components or modules!