janitza 800-CT8-A User Manual And Technical Data

Also see for 800-CON: User manual and technical data User manual and technical data Installation manual

Contents

janitza 800-CT8-A User Manual And Technical Data Manual pdf 18 page image

Modules 800-CT8-A | 800-CON www.janitza.de184. MountingCAUTIONDisregard of the assembly instructions may causeproperty damage or personal injury!Disregard of the assembly instructions may causedamage to your basic device with module or destroyit and/or may also result in personal injury.· In addition to the installation instructions foryour module, also observe the installationinstructions for your basic device, in particularthe safety and warning information.· Before installing modules- Disconnect the supply of power to the system!- Secure it against being switched on!- Check to be sure it is de-energized!- Ground and short circuit!- Cover or block off adjacent live parts!· Provide adequate air circulation in your installa-tion environment and cooling, as needed, whenthe ambient temperatures are high.· Return defective modules to Janitza electronicsGmbH in accordance with the shipping in-structions for air or road freight (complete withaccessories).· All usage information is also available as adownload at www.janitza.de.4.1 Mounting the 800-CT8-A moduleObserve the mounting instructions for your basicdevice (e.g. check bus connector installation!) andmount the 800-CT8-A module in the de-energizedsystem as follows:1. Press in the bottom bolts on the rear of themodule.2. If this has not yet been done, plug the busconnector (JanBus interface) included in deliveryinto the sockets on the rear of your module.pressFig.: Module rear viewFig.: Module rear view.Bus connectorBus connectorTwistedPress the bus connectorcontacts into the modulesocketsBottom boltsINFORMATIONThe following module assembly sequence must beobserved!ATTENTIONImproper handling may cause damage to themodule and result in material damage!The contacts of the bus connectors (Janbus interface)can bend or break off and destroy the bus connector.· Never touch or manipulate the contacts of thebus connector!· Never force the bus connector into the module!· When handling, transporting and storing themodule, protect the contacts of the bus con-nector!