jbc B iRON 115T Instruction Manual

Safety- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause a fire.- The power cord must be plugged into approved bases. When unplugging it, hold the plug, not the wire.- Do not work on electrically live parts.- The tool should be placed in the stand when not in use in order to charge the batteries.- The soldering tip or nozzle, the metal part of the tool and the stand may still be hot even when thestation is turned off.- Do not leave B115 Tool unattended when it is on.- Avoid flux coming into contact with skin or eyes to prevent irritation.- Be careful with the fumes produced when soldering.- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when workingto avoid personal harm.- Utmost care must be taken with liquid tin waste which can cause burns.- This appliance can be used by children over the age of eight and also persons with reduced physical,sensory or mental capabilities or lack of experience provided that they have been given adequatesupervision or instruction concerning the use of the appliance and understand the hazards involved.Children must not play with the appliance.- Maintenance must not be carried out by children unless supervised.- Do not expose the console to high temperatures, humidity or dust. Avoid direct sunlight.- Do not drop the console as it may cause damage or malfunction.- Do not disconnect your device when it is in file transfer mode.- Do not use the console in places where electronic devices are restricted.It is imperative to follow safety guidelines to prevent electricshock, injury, fire or explosion.1540 mm50 mm60 mm80 mm100 mm130 mm 130 mmpara manuales - color gris200 mm