laerdal SimJunior Directions For Use Manual

Also see for SimJunior: Quick setup guide Directions for use

laerdal SimJunior Directions For Use Manual Manual pdf 23 page image

21MaintenanceCharging the Manikin BatteryThe manikin battery charges itself as it is operated. If necessary, themanikin battery can be charged using an optional external poweradapter.1. Power down the manikin via the Link Box.2. Remove the manikin battery from the manikin.3. Connect an approved external battery charger (with a powercord that meets local specifications) to the bottom of themanikin battery. Connect the battery charger’s power cord intoa wall outlet .4. When the battery has finished charging, replace the battery inthe manikin.Replacing the Chest Rise BladderThe chest rise bladder is located in the lower end of the chestplate, centered under the lungs.1. Open the torso skin to expose the chest plate. See the section:Opening the Torso.2. Disconnect the clear tubing from the lung bladder and removethe lung bladder. For details on removing the lung bladder, seethe section: Replacing the Lung Bladder.3. Disconnect the clear tubing from the chest rise bladder.4. Discard the old bladder5. Insert new bladder6. Re-connect the tubing to the new bladder.7. Close the torso and replace the torso skin.Replacing the Lung BladderIf leaking occurs, the lung bladder (in the chest cavity) should bereplaced.1. Open the torso skin.2. Disconnect the clear tubing from under each side of the lungbladder. Refer to step 2 illustration in "Replacing the Chest RiseBladder."3. Disconnect the lung bladder clip from the top center of the lungbladder.4. Gently pull the top center portion of the lung bladder up fromits socket.5. Reverse process to install the new lung bladder.IntroductionStandard SystemAdvanced SystemManikin SetupMaintenanceSpare Parts TroubleshootingSpecifications