6OverviewA. On/Off button and Indicator.Press once to turn the unit on.Press again to turn the unit off.The indicator is steady green if the base unit has contactwith the remote control. If there is no contact with the remotecontrol the indicator will be blinking green.If battery needs to be replaced, the indicator will blink,alternating between green and orange.B DC power supply input: Used for stationary training and to limitbattery consumption.C Manikin Connector: Connects the base unit to the manikin.D Microphone input: External microphone attachment.Wireless microphone is sold separately.E USB port: For connection to PC. Used for transferof scenarios and logs.F Remote connector: Used for direct connectionwith the remote control. RF communication is disabledwhen the units are connected via cable.G Blood Pressure connector: Connects the tube fromthe blood pressure cuff.H Battery: Holds 6 replaceable C-cell batteries.I LCD display: Displays status and operation information.J Quick execution buttons: Function keys.The function of eachbutton is labelled on the display above the button.K Navigation keys: Use keys to navigate and select functionson the display.L OK / Select key: Use this key to activate selected functions.M Cancel / Back key: Go back from sub menus without any changes.N Numerical keys: Use these keys to enter numerical dataor to select numbered parameters.Can also be used as alphanumerical keys to enter file-and event-namesO Menu/Setup: Enter Setup Menu.P Scenario: Use this button to start a scenario.Q Shift keyR On/Off key: Press once to turn the unit on.Press again to turn the unit off.QPOJKLMNRIHGBCD E FA