lassele LMI-300A Installation And User Manual
Also see for LMI-300A: Installation and user manual
                                | |
Contents
| 
13Please install it in the following order by referring to fig 5.1. If a front panel is removed, you can see bin switch, packed in a plastic at a machine room.2. For removing a panel, please refer to “2.5 How to Remove Panel”.3. Fix bin switch to the right bottom of the icemaker with 4 thumbscrews, enclosed withthe switch.4. Put the cable of bin switch to “J”-type slot of the front supporter by releasing it. Whiledoing this, please install the cable not to the place where ices are dropping.5. After fixing the cable along the way where water pump harness is passing, connect itwith the blue connector at the top frame.2.8 Bin S/W InstallationWARNING- Bin switch should be equipped before operating the icemaker. If it is not properly equipped,it might cause a breakdown or bad impact on ice storage.Fig 5Thumbscrew“J” SlotSupporter frontPump motorharness |
Related manuals for lassele LMI-300A
manualsdatabase
Your AI-powered manual search engine