lassele LMI-300A Installation And User Manual
Also see for LMI-300A: Installation and user manual
                                | |
Contents
| 
92.4 Checklist before Installation- After unpacking, please check the product appearance. If there is damage on the product, pleasecontact local store.- Please remove a packing box, tape and other packing components. If these thingsare not removed, the icemaker might not be working properly.- Please check whether installation requirements like model name and voltage aresatisfied by checking name plate.- To avoid any damage during installation, please remove all panels. Please refer to“2.5 How to Remove Panel”.- Please remove all accessories, enclosed with the icemaker.- Please remove protective plastic film of the panel.- Please check whether a compressor is fixed and the fan blade turns freely.- The icemaker should be installed onto the bin. The available bin is as follows.● For LB-300S: 30 inch (76cm)● For LB-220S: 22 inch (56cm)● For more information, please contact stores.2.3.3 Power Connection- 115V/60Hz :The size of wiring, used for power connection, should be over 12AWG.- 220V/50Hz,60Hz : For details about size of cable for power supply, please refer to the “1.1Technical Specification”. |
Related manuals for lassele LMI-300A
manualsdatabase
Your AI-powered manual search engine